40 Amp Plasma Cutter

40 Amp Plasma Cutter DC Inverter

2 Review(s) Review this item

Your Price: $289.80

Retail Price:$788.99

You Savings:$499.19(63%)

40 amp plasma cutter cuts 1/2" cut at 7.2" per minute. Cuts 3/4" at 3.1" per minute.

Part Number: 97880

Availability: In Stock

Quantity

Description
Customer Reviews

Easy to operate

Fast clean cuts

Voltage/Frequency 220V/60Hz or 50Hz Single Phase

Duty Cycle: 60% @ 40A and 100% @ 30A

1/2" Rated Cut at 7.2" per Minute

3/4" Severance Cut at 3.1" per Minute

Operating Air Pressure: 65 psi @ 3.2 cfm

Ground Cable and Clamp

Ceramic Shield Cup and Swirling Ring

Air Filter/Regulator

Clamp Cable and Cutting Torch

Face Shield and Wire Brush

High Frequency Oscillating Startup

No Load Voltage: 230V

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Great Cutter

I can't believe I waited 10 years to buy a plasma cutter. Didn't want to spend 800 bucks and found this one for less than 300. Great buy and so far, only have cut 1/4" plate, but it cut through like butter. Very pleased.

Did you find this helpful? 21 of 22 Found Helpful

Reviewed by: (Verified Buyer) Shane K from Texas on 3/15/2018

Hobby welder

I bought this at a very reasonable price. At least reasonable for a plasma cutter. I assembled the machine as it called for, my box was missing the little hose that connects the regulator to the machine. After getting a plug adapter wired, I made my first cut on a piece of carbon steel flat bar 3/8” thick by 6” wide. I set the dial practically all the way up, because I figured 3/8” would probably be the maximum thickness this thing will cut. To my surprise, it cut through it like it was cutting through butter. I am very impressed. Not the best quality, but works great.